Two Notes Torpedo Captor Load Box 8 OHM
Tax included. Shipping calculated at checkout.
Two Notes Torpedo Captor Load Box 8 OHM The concept You love the sound of your amplifier pushed right to the magic sweet spot where the best tones are. Until now, the only available option was blasting your sound through a 4×12″ to properly excite a microphone. Enter Torpedo, the simplest and most realistic way to get your sound to your audience. Use the amp you love! Everything that makes a real amp rule over all the other alternatives is retained. You can even record silently late at night. Gone is the backache from the loadout, complaints from neighbours, venue staff or even bandmates and the frustration of not being able to sound at one’s best trying to reduce the volume. Torpedo Captor was designed to cover the needs of direct recording or miking any kind of guitar or bass amp, in a live or studio situation. Reactive loadbox Playing silently or at low volumes is often a requirement, especially at home but more and more on stage or in the studio. To play your amp without a cabinet you need a Loadbox. Two notes is known for the most accurate and feature rich Loadboxes in the world, using the reactive technology, in other words mimicking perfectly the impedance of a speaker. Your amp will absolutely believe it’s connected to a real cabinet. Analog speakersim When using the Captor on stage to feed a PA, you will need to polish the sound coming from your amp. The analog speaker sim is derived from the acclaimed Le Preamp series. You will be able to get a detailed and focused sound for your monitor or the front of house while keeping a low volume on stage. Add a Torpedo C.A.B. with its large collection of IR Cab Sims for the ultimate direct solution. Format, versions The Captor is the size of a large DI box, so you can conveniently place it on your pedalboard or on top of your amp. The Captor comes in 4, 8 or 16 Ohm versions, make sure to get the one that matches with your amp. Attenuator If you wish to keep a cabinet on stage, the Captor features a direct speaker THRU or ATT output. It allows for full volume or a fixed – 20dB attenuation. Keep your amp in its sweet spot while at manageable volumes. Reactive loadbox Input impedance: 4, 8 or 16 Ohms Admissible power: 100W RMS Cooled by fan, thermal security: the amp and musician work in security. Input / Output Speaker Input: 1/4″ Jack unbalanced (TS, Tip/Sleeve) Speaker Att: 1/4″ Jack unbalanced (TS) – Attenuation: -20dB. Speaker Thru: 1/4″ Jack unbalanced (TS) – Directly connected to Speaker Input. Disconnects the loadbox when used. Line Output: 1/4″ Jack balanced (TRS) – Impedance: approx 1 kOhms – Without speaker simulation DI Output: XLR balanced – Impedance: 600 Ohms – With or without speaker simulation Speaker sim Guitar or Bass, analog, based on acclaimed Torpedo virtual cabinets Power Power is required only for the XLR DI output and speaker simulation. Phantom power or DC jack, 2.1×5.5mm, negative center. Current : 5mA Dimensions & weight 175 x 126 x 62 mm 1 kg